How to find the BPM of a song, and check your band plays it there
The tempo of a song is the number of beats per minute, BPM. A ballad might sit at 70, a pop song at 110, a punk song at 180. You need the number for three things: to set a metronome when you practise, to agree with the band how fast the song goes, and to notice when the band is playing it somewhere else entirely.
Finding it is easier than it sounds. Getting the right number, rather than half or double the right number, is where most people go wrong. And knowing the tempo of the record is only half the job: the other half is knowing the tempo your band actually plays.
Four ways to find the tempo
Count for fifteen seconds. Put the song on, find the pulse you would tap your foot to, and count the beats for fifteen seconds. Multiply by four. It is rough, within five BPM or so, and it needs nothing but a clock. Fine for a first idea.
Tap tempo. Most metronome apps have a button you tap in time with the music, and they work out the BPM from the gaps between your taps. Tap for eight or ten beats, not two: the first few taps are always a little off. This is the quickest accurate method, and the one most musicians use.
Match a metronome by ear. Start a click near your guess and play the song at the same time. If the click drifts ahead, lower it; if it falls behind, raise it. When the click sits on the snare for a whole verse, that is your number. Slower than tapping, but more precise, and it trains your ear for tempo at the same time.
Let software analyse the file. Audio editors and DJ software can detect the tempo of a recording, and there are websites that look up the BPM of well-known songs. They are usually right on music with a steady beat and often wrong on anything played live without a click, or with a lot of rubato.
The half-time and double-time trap
This is where most wrong numbers come from. A song at 140 BPM and a song at 70 BPM can feel like the same speed, because one counts every beat and the other counts every second one. Tools get this wrong all the time, and so do people.
A rule that settles most cases: count the pulse the drummer plays on the snare as beats two and four. In most rock, pop and funk, the snare lands on two and four of each bar. If your count puts the snare on every beat, you are counting at half the real tempo; if the snare hits only every fourth count, you are at double.
Compound time is the other trap. A song in 6/8 has six quick pulses per bar but feels like two big beats. Metronomes and musicians disagree about which to count. Pick one with the band, write it down, and stick to it. "Ninety in 6/8, counting the dotted quarter" is clear; "about ninety" is not.
Records drift, and live versions drift more
A tempo number assumes the song stays at one speed. Records made with a click do. Many older records, and most live ones, do not: the chorus is three BPM faster than the verse, the last chorus faster again. That is not a mistake, it is how bands play, and it is part of why those records feel alive.
So when you measure a song, measure the verse and the chorus separately. If they differ, decide with the band which number goes on the song: the verse tempo, or the one you want to end at. What matters is that everyone counts in from the same number.
The tempo you agreed and the tempo you play
Here is the part that changes rehearsals. Once the band has agreed a tempo, the useful question is no longer "how fast is the record?" It is "how fast do we actually play it?"
Most bands rush. Not all the time: on the songs they like, in the chorus, when they are nervous, and almost always on stage. A band that agrees 120 and plays 128 has not made a mistake anyone can hear in the room, but the song feels hurried, the singer runs out of breath and the fills get crowded.
You cannot hear this while playing. You can measure it afterwards, if you record. Take the rehearsal recording, find the tempo of the take with any of the methods above, and compare it with the number you agreed. Do it for a few rehearsals and patterns appear: the same song always rushes, or the band always speeds up after the second chorus. Those are things you can fix with a click in a single session.
Recording rehearsals so that this is effortless is covered in how to record band rehearsals on your phone, and the click itself in how to practise with a metronome.
How Band Companion helps
Band Companion is an app for bands to record rehearsals and practise. What it does with tempo today:
- Every song keeps its target tempo, along with its key and time signature, shared with the whole band.
- The metronome has tap tempo, and it opens from the song already set to that song's tempo and time signature. You can change the tempo while it plays, by wheel, keyboard or tapping, without the click stopping.
- Takes recorded in the app get their tempo detected automatically. Every rehearsal take shows its BPM next to the date, so comparing what you played with what you agreed is a glance at the list, not a job.
What it does not do: it does not analyse the tempo of an audio file you import. A track you bring in from elsewhere keeps no BPM; for that, tap it in with the metronome. And it does not look up the tempo of songs by name.
Frequently asked questions
How do I find the BPM of a song?
The quickest accurate way is tap tempo: tap a button in time with the music for eight to ten beats and the app calculates the BPM. Without an app, count the beats for fifteen seconds and multiply by four. Check the result by playing a metronome at that tempo along with the song.
Why does my BPM tool give half or double the tempo?
Because a song can be counted at two levels of pulse, and tools often pick the wrong one. Count the beat where the snare lands on two and four: if the snare falls on every count you are at half tempo, and if it falls every fourth count you are at double.
What is a normal tempo for a song?
Most popular music sits between 70 and 140 BPM. Ballads are often 60 to 80, mid-tempo rock and pop 100 to 125, dance music 120 to 130, and fast punk or metal can go past 180. The right tempo is the one the band agrees and can play well, not the one on the record.
How do I know if my band is rushing?
Record the rehearsal and measure the tempo of the take, then compare it with the tempo you agreed for the song. If it is consistently higher, the band is rushing. Checking over several rehearsals shows whether it is one song, one section or a general habit.
Can Band Companion detect the BPM of an MP3?
No. It detects the tempo of takes you record in the app, which is what tells you how fast your band really plays. For a file you import, use tap tempo in the app's metronome to find the number and save it on the song.