A backing track player for practice: tempo, key and loops
A backing track is the band without you. Drums, bass, chords, sometimes a guide vocal, and a hole exactly the shape of your part. You press play and fill the hole. It is the closest thing to a rehearsal you can have alone in a bedroom at eleven at night, and it is one of the most useful practice tools there is.
It is also easy to use badly. The track runs at 126 bpm and you can manage the solo at 100. It is in E and your singer does it in D. The bit you need is forty seconds long and sits three minutes in, so every attempt costs you the whole intro. A normal music player can do nothing about any of that: it plays the file from the start, at its speed, in its key.
That is the difference between a music player and a backing track player. What follows is what the second one has to do, where good tracks come from, and a way to practise over them that actually moves you forward.
What a backing track player has to do
Four things. If a player does not do all four, you end up fighting it instead of practising.
Change the tempo without changing the pitch. Slow a file down the naive way, the way a turntable does, and the key drops with it. Play along with that and you are practising against a band that is out of tune with your instrument. A proper player stretches time and leaves pitch alone, so the track at 75 percent is still in E.
Change the key in semitones. For the singer who needs it a tone lower, for the guitarist whose band tunes down half a step, for the alto sax player who would rather not transpose in their head while learning a solo. Moving the track is better than moving yourself, because what you are training is a part that becomes automatic, and arithmetic while playing stops that happening.
Loop a section. Two points, A and B, and the player runs between them until you stop it. The twelve bars of the solo. The bridge with the awkward chord change. The last chorus where the band pushes. If every attempt means listening to the intro again, you will do eleven attempts in an evening instead of two hundred.
Jump to the place you were working on. Practice lasts weeks, not one evening. A marker on the solo, another on the bridge, and tomorrow you open the track and you are there.
Anything beyond this is a bonus. Without these four it is not a practice tool, it is a stereo.
Where to get backing tracks
There are three sources, and they are not equally good.
Tracks you buy or download. There are sites and teachers that sell or give away backing tracks as MP3 or WAV files, by song, by style or by key. Quality varies from excellent to a drum machine and a keyboard preset. The advantage is that you own the file, so any player can open it.
Tracks on YouTube. There are thousands, and many are good. YouTube's own speed setting keeps the pitch, which is more than some apps manage. What it does not have is a loop between two points or a key change, and downloading the audio to use elsewhere goes against its terms. Fine for a quick jam, awkward for real practice.
Your own band. This is the one most people miss, and it is the best of the three. Record a rehearsal where you sit out one run of the song, or where the band plays the solo section round four times without the lead. That take is a backing track of your band's version: your tempo, your key, your arrangement, the intro as short as you actually play it. Practise over a commercial track for a month and you will be confident in a version nobody at rehearsal plays.
If the band already records rehearsals, you probably have these takes already. How to make that easy, and keep them filed by song, is in how to record band rehearsals on your phone. And for rehearsals that produce takes worth practising over, see how to run a band rehearsal.
A practice routine over a backing track
For one solo, one bridge or one difficult section, in about twenty minutes:
- Find the section and mark it. Listen through once, put a marker where it starts.
- Loop it with a bar of run-up. A starts one bar before the section, B one bar after. You are training the way in and the way out, not only the notes in the middle.
- Drop the tempo until it is easy. Not "mostly works". Easy, without having to concentrate hard. That is usually slower than feels respectable.
- Ten clean passes, then up about five percent. Not clean? Back down and do ten more.
- At full tempo, open the loop out. Two bars either side, then the whole section, then from the verse before it.
- Finish with one pass of the whole song without stopping. A loop teaches the passage; the full run teaches you to arrive at it with the rest of the song in your hands.
For improvising rather than learning a set part, swap step 4: stay at one tempo and give yourself a rule per loop. Only the minor pentatonic. Only three notes. Start every phrase on the second beat. The backing track keeps going, and the rule keeps you from playing the same three licks every time round.
The same ladder of tempo and loops is explained in more detail, for learning a passage from a recording, in practising a song at home with an A/B loop.
When to change the key, and how far to push it
Three cases where it is worth moving the track rather than yourself:
- The singer. If the band plays the song a tone lower than the record, practise it there. Learning it in the original key and transposing on the night is how you end up hesitating on every chord change.
- Tuned-down guitars. A band in E flat practising over tracks in E either retunes every time or plays everything a fret lower than the shapes they know. Shift the track down one semitone and both problems go away.
- Transposing instruments. Moving the track so that what you read is what you hear removes a whole layer of mental work while you learn.
How far to go: a semitone or two sounds natural. Beyond three or four, most pitch shifting starts to sound processed: voices go thin, cymbals smear. For practice that is usually acceptable. For anything you would play to an audience, it is not.
How it works in Band Companion
Band Companion is an app for bands to record rehearsals and practise, and its player was built for exactly this job.
You bring the track. In a song, Import audios takes MP3, WAV, M4A, FLAC, OGG and most other audio formats. On Android you can also share a file to the app from your file manager or a messaging app. The backing track becomes one more take of the song, next to your rehearsal recordings, rather than a loose file somewhere in your downloads.
The four things, honestly:
- Tempo from 50 to 150 percent, without changing the pitch. On Android, iPhone and the web app.
- Key shifts in semitones, up to twelve either way. Today this works in the Android app. On iPhone and in the web app the key change is not there yet; tempo, loop and markers are.
- A/B loop between any two points, set while the track plays.
- Markers by category: mistakes to fix, good moments, arrangement notes. The solo you are working on stays marked between sessions.
It is shared with the band. If the band shares its songs through the cloud, a backing track one person imports is there for everyone, in the same song, next to the take the band agreed on. Everyone practises over the same version.
What it does not do, so you do not go looking for it:
- It does not come with backing tracks. There is no library. You import tracks you have or record them with your band.
- It does not remove an instrument from a finished song. Splitting a mix into separate parts, to mute the guitar on the original record, is a different kind of tool. Band Companion plays the file you give it.
- It does not generate accompaniment. No virtual drummer, no chord-based backing. If you want a band that invents itself, that is a different app. If you want a band that plays the song the way your band plays it, record them.
Frequently asked questions
What is a backing track?
A recording of a song with one part missing, so you can play or sing that part over it. Usually the drums, bass and chords are there and the lead, solo or vocal is not. It is used to practise a part in context, to work on improvisation, or to perform alone when there is no band.
What should a backing track player do that a normal music player does not?
Four things: change the tempo without changing the pitch, change the key in semitones, loop a section between two points, and let you mark places to come back to. A normal player only plays the file from the start at its own speed and in its own key.
Can I slow down a backing track without changing the key?
Yes, with a player that does time stretching, which separates tempo from pitch. Band Companion lets you play a track anywhere from 50 to 150 percent of its speed and it stays in the same key. Slowing it the naive way would lower the pitch too, and you would be practising against a band that is out of tune with you.
Where can I get backing tracks for free?
There are free tracks on YouTube and on sites from teachers and musicians, and many are good. The best free source is often your own band: record a run of the song at rehearsal with your part left out, and you have a backing track in your band's tempo, key and arrangement. A rehearsal app that files takes by song makes those easy to find later.
Can Band Companion change the key of a backing track on iPhone?
Not yet. The key change in semitones works in the Android app. On iPhone and in the web app you can import the track, loop it, mark it and change the tempo without affecting the pitch, but the key shift is still to come.